[TS0601 / _TZE284_1youk3hj] (Human presence sensor) No reaction for lux setting

[hahacsuser]

What happened?

Sensor activated ignoring lux_value setting.

What did you expect to happen?

With lux_value = 10_lux OR 20_lux OR 50_lux the motion sensor should be activated only in dark/low light.
So I want to turn on ambient lights when human detected only in dark hallway.

How to reproduce it (minimal and precise)

Set the lux_value to any except 24h

Zigbee2MQTT version

2.7.1 (unknown)

Adapter firmware version

{"build":0,"ezsp":13,"major":7,"minor":4,"patch":5,"revision":"7.4.5 [GA]","special":0,"type":170}

Adapter

EmberZNet

Setup

os: #1 SMP PREEMPT Tue Nov 4 14:21:05 UTC 2025 - 6.12.51-haos - arm64
node: v22.16.0
ha: true

Device database.db entry

No response

Debug log

No response

Notes

Device

software_build_id: undefined
date_code: ``
endpoints:

{"1":{"bindings":[],"clusters":{"input":["genGroups","genScenes","manuSpecificTuya","genBasic","zosungIRTransmit"],"output":["genOta","genTime"]},"configured_reportings":[],"scenes":[]},"242":{"bindings":[],"clusters":{"input":[],"output":["greenPower"]},"configured_reportings":[],"scenes":[]}}

Health

time: Tue Dec 09 2025 14:30:20 GMT+0400 (Samara Standard Time)
os.load_average: 0.15, 0.1, 0.05
os.memory_percent: 48.3138
process.memory_percent: 4.2517
process.uptime_sec: 1810

{"leave_count":0,"messages":26,"messages_per_sec":0.0149,"network_address_changes":0}