[WaveFox for FF151] - Separators between Firefox View and 1st tab no longer available?

[Minibus93]

Important clarification

• I have read and followed the installation instructions in the README

Describe the issue

Hello,

Before I updated WaveFox for FF151, when separators were enabled, there would be a separator between the firefox view icon (top left icon) and the 1st tab.
After the update, after setting the right keys and enabling separators, they appear to work just fine, but there is no longer a separator before the 1st tab.
I've circled in the image below how it was before the update (altough the firefox view icon is missing, but that's not important to explain):

To reproduce

1. Setup WaveFox with the correct related entries to enable separators
2. Open two tabs
3. Select the 2nd tab
4. Look at top left corner
5. See that there's no separator between Firefox View and the 1st tab

Expected behavior

There should be a separator between Firefox View and the 1st tab like before the update.

Additional information

No response

Operating system

Windows 11

Color scheme

• System
• Light
• Dark
• Contrast

Firefox version

Release

Firefox theme

• System / Auto
• Light
• Dark
• Repository / AMO

WaveFox version

Release

[QNetITQ]

In version 151, separators are only between regular tabs. In version 152, separators are currently between all tabs, but not at the edges. If it's that important, I can bring back the tab separators at the edges, although that will complicate the logic.

[Minibus93]

If it's that important, I can bring back the tab separators at the edges, although that will complicate the logic.

I personally think it provides a much cleaner look by separating the tabs from the Firefox View button, so I’d consider it a valuable improvement. However, I understand the trade-off with code complexity so I'll leave it to you to decide if the extra maintenance is worth the visual gain.

[QNetITQ]

I agree, I also like it when all the tabs are visually separated. The biggest problem with dividers is the impossibility of precisely positioning them between tabs. It's physically impossible to place 1 pixel of divider between 4 pixels or 0 pixels. I worked around this in version 152. It shouldn't be too difficult to restore the missing dividers.

[QNetITQ]

Made some changes in version 152. Now all separators are visible, but not on floating tabs (which are a special case) I've fixed it as best I could. Now all the dividers are visible.

[Minibus93]

Thanks!