Add variant for RAK_killer PCB

boards/RAK_killer.json

@@ -0,0 +1,78 @@
+{
+    "build": {
+      "arduino":{
+        "ldscript": "nrf52840_s140_v6_extrafs.ld"
+      },
+      "core": "nRF5",
+      "cpu": "cortex-m4",
+      "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+      "f_cpu": "64000000L",
+      "hwids": [
+        [
+          "0x239A",
+          "0x00B3"
+        ],
+        [
+          "0x239A",
+          "0x8029"
+        ],
+        [
+          "0x239A",
+          "0x0029"
+        ],
+        [
+          "0x239A",
+          "0x002A"
+        ],
+        [
+          "0x239A",
+          "0x802A"
+        ]
+      ],
+      "usb_product": "ProMicro NRF52840",
+      "mcu": "nrf52840",
+      "variant": "RAK_killer",
+      "bsp": {
+        "name": "adafruit"
+      },
+      "softdevice": {
+        "sd_flags": "-DS140",
+        "sd_name": "s140",
+        "sd_version": "6.1.1",
+        "sd_fwid": "0x00B6"
+      },
+      "bootloader": {
+        "settings_addr": "0xFF000"
+      }
+    },
+    "connectivity": [
+      "bluetooth"
+    ],
+    "debug": {
+      "jlink_device": "nRF52840_xxAA",
+      "svd_path": "nrf52840.svd",
+      "openocd_target": "nrf52.cfg"
+    },
+    "frameworks": [
+      "arduino",
+      "zephyr"
+    ],
+    "name": "ProMicro NRF52840",
+    "upload": {
+      "maximum_ram_size": 235520,
+      "maximum_size": 815104,
+      "speed": 115200,
+      "protocol": "nrfutil",
+      "protocols": [
+        "jlink",
+        "nrfjprog",
+        "nrfutil",
+        "stlink"
+      ],
+      "use_1200bps_touch": true,
+      "require_upload_port": true,
+      "wait_for_upload_port": true
+    },
+    "url": "https://www.nologo.tech/en/product/otherboard/NRF52840.html",
+    "vendor": "Nologo"
+  }

variants/rak_killer/RAKkillerBoard.cpp

@@ -0,0 +1,91 @@
+#include <Arduino.h>
+#include "RAKkillerBoard.h"
+
+#include <bluefruit.h>
+#include <Wire.h>
+
+static BLEDfu bledfu;
+
+static void connect_callback(uint16_t conn_handle)
+{
+  (void)conn_handle;
+  MESH_DEBUG_PRINTLN("BLE client connected");
+}
+
+static void disconnect_callback(uint16_t conn_handle, uint8_t reason)
+{
+  (void)conn_handle;
+  (void)reason;
+
+  MESH_DEBUG_PRINTLN("BLE client disconnected");
+}
+
+void RAKkillerBoard::begin() {
+  // for future use, sub-classes SHOULD call this from their begin()
+  startup_reason = BD_STARTUP_NORMAL;
+  btn_prev_state = HIGH;
+
+  pinMode(PIN_VBAT_READ, INPUT);
+
+#ifdef BUTTON_PIN
+      pinMode(BUTTON_PIN, INPUT_PULLUP);
+    #endif
+
+#if defined(PIN_BOARD_SDA) && defined(PIN_BOARD_SCL)
+  Wire.setPins(PIN_BOARD_SDA, PIN_BOARD_SCL);
+#endif
+
+  Wire.begin();
+
+#ifdef P_LORA_TX_LED
+  pinMode(P_LORA_TX_LED, OUTPUT);
+  digitalWrite(P_LORA_TX_LED, LOW);
+#endif
+
+  pinMode(SX126X_POWER_EN, OUTPUT);
+  digitalWrite(SX126X_POWER_EN, HIGH);
+  delay(10);   // give sx1262 some time to power up
+}
+
+bool RAKkillerBoard::startOTAUpdate(const char* id, char reply[]) {
+  // Config the peripheral connection with maximum bandwidth
+  // more SRAM required by SoftDevice
+  // Note: All config***() function must be called before begin()
+  Bluefruit.configPrphBandwidth(BANDWIDTH_MAX);
+  Bluefruit.configPrphConn(92, BLE_GAP_EVENT_LENGTH_MIN, 16, 16);
+
+  Bluefruit.begin(1, 0);
+  // Set max power. Accepted values are: -40, -30, -20, -16, -12, -8, -4, 0, 4
+  Bluefruit.setTxPower(4);
+  // Set the BLE device name
+  Bluefruit.setName("RAK_killer_OTA");
+
+  Bluefruit.Periph.setConnectCallback(connect_callback);
+  Bluefruit.Periph.setDisconnectCallback(disconnect_callback);
+
+  // To be consistent OTA DFU should be added first if it exists
+  bledfu.begin();
+
+  // Set up and start advertising
+  // Advertising packet
+  Bluefruit.Advertising.addFlags(BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE);
+  Bluefruit.Advertising.addTxPower();
+  Bluefruit.Advertising.addName();
+
+  /* Start Advertising
+    - Enable auto advertising if disconnected
+    - Interval:  fast mode = 20 ms, slow mode = 152.5 ms
+    - Timeout for fast mode is 30 seconds
+    - Start(timeout) with timeout = 0 will advertise forever (until connected)
+
+    For recommended advertising interval
+    https://developer.apple.com/library/content/qa/qa1931/_index.html
+  */
+  Bluefruit.Advertising.restartOnDisconnect(true);
+  Bluefruit.Advertising.setInterval(32, 244); // in unit of 0.625 ms
+  Bluefruit.Advertising.setFastTimeout(30);   // number of seconds in fast mode
+  Bluefruit.Advertising.start(0);             // 0 = Don't stop advertising after n seconds
+
+  strcpy(reply, "OK - started");
+  return true;
+}

variants/rak_killer/RAKkillerBoard.h

@@ -0,0 +1,74 @@
+#pragma once
+
+#include <MeshCore.h>
+#include <Arduino.h>
+
+// LoRa radio module pins for Heltec T114
+#define  P_LORA_DIO_1     (0+9)
+#define  P_LORA_NSS       PIN_SPI_NSS
+#define  P_LORA_RESET     (0+10)
+#define  P_LORA_BUSY      (0+29)
+#define  P_LORA_SCLK      PIN_SPI_SCK
+#define  P_LORA_MISO      PIN_SPI_MISO
+#define  P_LORA_MOSI      PIN_SPI_MOSI
+#define  SX126X_POWER_EN  (0+13)
+
+#define SX126X_DIO2_AS_RF_SWITCH  true
+#define SX126X_DIO3_TCXO_VOLTAGE   1.8
+
+// built-ins
+#define  PIN_VBAT_READ    (0+31)
+#define ADC_MULTIPLIER    (2.025F)
+
+//#define  PIN_BAT_CTL      -1
+//#define  MV_LSB   (3000.0F / 4096.0F) // 12-bit ADC with 3.0V input range
+
+class RAKkillerBoard : public mesh::MainBoard {
+protected:
+  uint8_t startup_reason;
+  uint8_t btn_prev_state;
+
+public:
+  void begin();
+  uint8_t getStartupReason() const override { return startup_reason; }
+
+#if defined(P_LORA_TX_LED)
+  void onBeforeTransmit() override {
+    digitalWrite(P_LORA_TX_LED, HIGH);   // turn TX LED on
+  }
+  void onAfterTransmit() override {
+    digitalWrite(P_LORA_TX_LED, LOW);   // turn TX LED off
+  }
+#endif
+
+  uint16_t getBattMilliVolts() override {
+
+    analogReadResolution(12);
+    analogReference(AR_INTERNAL_3_0);
+    delay(10);
+    float volts = (analogRead(BATTERY_PIN) * ADC_MULTIPLIER * AREF_VOLTAGE) / 4096;
+
+    return volts * 1000;
+  } 
+
+  const char* getManufacturerName() const override {
+    return "RAK killer";
+  }
+
+int buttonStateChanged() {
+    #ifdef BUTTON_PIN
+      uint8_t v = digitalRead(BUTTON_PIN);
+      if (v != btn_prev_state) {
+        btn_prev_state = v;
+        return (v == LOW) ? 1 : -1;
+      }
+    #endif
+      return 0;
+  }
+
+  void reboot() override {
+    NVIC_SystemReset();
+  }
+
+  bool startOTAUpdate(const char* id, char reply[]) override;
+};