Add sensor support to Heltec t114

.devcontainer/devcontainer.json

@@ -0,0 +1,44 @@
+{
+	"name": "MeshCore",
+	"image": "mcr.microsoft.com/devcontainers/python:3-bookworm",
+	"features": {
+		"ghcr.io/rocker-org/devcontainer-features/apt-packages:1": {
+			"packages": [
+				"sudo"
+			]
+		}
+	},
+	"runArgs": [
+		"--privileged",
+		// arch tty* is owned by uucp (986)
+		// debian tty* is owned by uucp (20) - no change needed
+		"--group-add=986",
+		"--network=host",
+		"--volume=/dev/bus/usb:/dev/bus/usb:ro"
+	],
+	"postCreateCommand": {
+		"platformio": "pipx install platformio"
+	},
+	"customizations": {
+		"vscode": {
+			"settings": {
+				"platformio-ide.disablePIOHomeStartup": true,
+				"editor.formatOnSave": false,
+				"workbench.colorCustomizations": {
+					"titleBar.activeBackground": "#0d1a2b",
+					"titleBar.activeForeground": "#ffffff",
+					"titleBar.inactiveBackground": "#0d1a2b99",
+					"titleBar.inactiveForeground": "#ffffff99"
+				}
+			},
+			"extensions": [
+				"platformio.platformio-ide",
+				"github.vscode-github-actions",
+				"GitHub.vscode-pull-request-github"
+			],
+			"unwantedRecommendations": [
+				"ms-vscode.cpptools-extension-pack"
+			]
+		}
+	}
+}

boards/thinknode_m3.json

@@ -0,0 +1,72 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      [
+        "0x239A",
+        "0x4405"
+      ],
+      [
+        "0x239A",
+        "0x0029"
+      ],
+      [
+        "0x239A",
+        "0x002A"
+      ]
+    ],
+    "usb_product": "elecrow_eink",
+    "mcu": "nrf52840",
+    "variant": "ELECROW-ThinkNode-M3",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": [
+    "bluetooth"
+  ],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": [
+      "jlink"
+    ],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52.cfg"
+  },
+  "frameworks": [
+    "arduino"
+  ],
+  "name": "elecrow nrf",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink"
+    ]
+  },
+  "url": "https://github.com/Elecrow-RD",
+  "vendor": "ELECROW"
+}

examples/simple_repeater/MyMesh.cpp

@@ -173,6 +173,12 @@ int MyMesh::handleRequest(ClientInfo *sender, uint32_t sender_timestamp, uint8_t
 
     telemetry.reset();
     telemetry.addVoltage(TELEM_CHANNEL_SELF, (float)board.getBattMilliVolts() / 1000.0f);
+
+    float temperature = board.getMCUTemperature();
+    if(!isnan(temperature)) { // Supported boards with built-in temperature sensor. ESP32-C3 may return NAN
+      telemetry.addTemperature(TELEM_CHANNEL_SELF, temperature); // Built-in MCU Temperature
+    }
+
     // query other sensors -- target specific
     if ((sender->permissions & PERM_ACL_ROLE_MASK) == PERM_ACL_GUEST) {
       perm_mask = 0x00;  // just base telemetry allowed

src/MeshCore.h

@@ -1,6 +1,7 @@
 #pragma once
 
 #include <stdint.h>
+#include <math.h>
 
 #define MAX_HASH_SIZE        8
 #define PUB_KEY_SIZE        32
@@ -42,6 +43,7 @@ namespace mesh {
 class MainBoard {
 public:
   virtual uint16_t getBattMilliVolts() = 0;
+  virtual float getMCUTemperature() { return NAN; }
   virtual bool setAdcMultiplier(float multiplier) { return false; };
   virtual float getAdcMultiplier() const { return 0.0f; }
   virtual const char* getManufacturerName() const = 0;

src/helpers/ESP32Board.h

@@ -42,6 +42,11 @@ class ESP32Board : public mesh::MainBoard {
   #endif
   }
 
+  // Temperature from ESP32 MCU
+  float getMCUTemperature() override {
+    return temperatureRead();
+  }
+
   uint8_t getStartupReason() const override { return startup_reason; }
 
 #if defined(P_LORA_TX_LED)

src/helpers/NRF52Board.cpp

@@ -0,0 +1,104 @@
+#if defined(NRF52_PLATFORM)
+#include "NRF52Board.h"
+
+#include <bluefruit.h>
+
+static BLEDfu bledfu;
+
+static void connect_callback(uint16_t conn_handle) {
+  (void)conn_handle;
+  MESH_DEBUG_PRINTLN("BLE client connected");
+}
+
+static void disconnect_callback(uint16_t conn_handle, uint8_t reason) {
+  (void)conn_handle;
+  (void)reason;
+
+  MESH_DEBUG_PRINTLN("BLE client disconnected");
+}
+
+void NRF52Board::begin() {
+  startup_reason = BD_STARTUP_NORMAL;
+}
+
+void NRF52BoardDCDC::begin() {
+  NRF52Board::begin();
+
+  // Enable DC/DC converter for improved power efficiency
+  uint8_t sd_enabled = 0;
+  sd_softdevice_is_enabled(&sd_enabled);
+  if (sd_enabled) {
+    sd_power_dcdc_mode_set(NRF_POWER_DCDC_ENABLE);
+  } else {
+    NRF_POWER->DCDCEN = 1;
+  }
+}
+
+// Temperature from NRF52 MCU
+float NRF52Board::getMCUTemperature() {
+  NRF_TEMP->TASKS_START = 1; // Start temperature measurement
+
+  long startTime = millis();  
+  while (NRF_TEMP->EVENTS_DATARDY == 0) { // Wait for completion. Should complete in 50us
+    if(millis() - startTime > 5) {  // To wait 5ms just in case
+      NRF_TEMP->TASKS_STOP = 1;
+      return NAN;
+    }
+  }
+
+  NRF_TEMP->EVENTS_DATARDY = 0; // Clear event flag
+
+  int32_t temp = NRF_TEMP->TEMP; // In 0.25 *C units
+  NRF_TEMP->TASKS_STOP = 1;
+
+  return temp * 0.25f; // Convert to *C
+}
+
+bool NRF52BoardOTA::startOTAUpdate(const char *id, char reply[]) {
+  // Config the peripheral connection with maximum bandwidth
+  // more SRAM required by SoftDevice
+  // Note: All config***() function must be called before begin()
+  Bluefruit.configPrphBandwidth(BANDWIDTH_MAX);
+  Bluefruit.configPrphConn(92, BLE_GAP_EVENT_LENGTH_MIN, 16, 16);
+
+  Bluefruit.begin(1, 0);
+  // Set max power. Accepted values are: -40, -30, -20, -16, -12, -8, -4, 0, 4
+  Bluefruit.setTxPower(4);
+  // Set the BLE device name
+  Bluefruit.setName(ota_name);
+
+  Bluefruit.Periph.setConnectCallback(connect_callback);
+  Bluefruit.Periph.setDisconnectCallback(disconnect_callback);
+
+  // To be consistent OTA DFU should be added first if it exists
+  bledfu.begin();
+
+  // Set up and start advertising
+  // Advertising packet
+  Bluefruit.Advertising.addFlags(BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE);
+  Bluefruit.Advertising.addTxPower();
+  Bluefruit.Advertising.addName();
+
+  /* Start Advertising
+    - Enable auto advertising if disconnected
+    - Interval:  fast mode = 20 ms, slow mode = 152.5 ms
+    - Timeout for fast mode is 30 seconds
+    - Start(timeout) with timeout = 0 will advertise forever (until connected)
+
+    For recommended advertising interval
+    https://developer.apple.com/library/content/qa/qa1931/_index.html
+  */
+  Bluefruit.Advertising.restartOnDisconnect(true);
+  Bluefruit.Advertising.setInterval(32, 244); // in unit of 0.625 ms
+  Bluefruit.Advertising.setFastTimeout(30);   // number of seconds in fast mode
+  Bluefruit.Advertising.start(0);             // 0 = Don't stop advertising after n seconds
+
+  uint8_t mac_addr[6];
+  memset(mac_addr, 0, sizeof(mac_addr));
+  Bluefruit.getAddr(mac_addr);
+  sprintf(reply, "OK - mac: %02X:%02X:%02X:%02X:%02X:%02X", mac_addr[5], mac_addr[4], mac_addr[3],
+          mac_addr[2], mac_addr[1], mac_addr[0]);
+
+  return true;
+}
+#endif

src/helpers/NRF52Board.h

@@ -0,0 +1,39 @@
+#pragma once
+
+#include <Arduino.h>
+#include <MeshCore.h>
+
+#if defined(NRF52_PLATFORM)
+
+class NRF52Board : public mesh::MainBoard {
+protected:
+  uint8_t startup_reason;
+
+public:
+  virtual void begin();
+  virtual uint8_t getStartupReason() const override { return startup_reason; }
+  virtual float getMCUTemperature() override;
+  virtual void reboot() override { NVIC_SystemReset(); }
+};
+
+/*
+ * The NRF52 has an internal DC/DC regulator that allows increased efficiency
+ * compared to the LDO regulator. For being able to use it, the module/board
+ * needs to have the required inductors and and capacitors populated. If the
+ * hardware requirements are met, this subclass can be used to enable the DC/DC
+ * regulator.
+ */
+class NRF52BoardDCDC : virtual public NRF52Board {
+public:
+  virtual void begin() override;
+};
+
+class NRF52BoardOTA : virtual public NRF52Board {
+private:
+  char *ota_name;
+
+public:
+  NRF52BoardOTA(char *name) : ota_name(name) {}
+  virtual bool startOTAUpdate(const char *id, char reply[]) override;
+};
+#endif